Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-132
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
Program External Page Directory Number Length:
• Input 08-09-11-01, then press [
save
savesave
save].
• Press [chg
chgchg
chg] until the appropriate length displays.
• Press [next
nextnext
next] to program Leading 1.
Program External Page Directory Number Leading 1, 2 or 3:
• Input 08-09-11-02, then press [
save
savesave
save].
• Press [chg
chgchg
chg].
• Input the new directory number leading digit(s) (see Flexible Numbering Plan for rules of Directory
Numbers). Then press [
save
savesave
save].
• Press
the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use
¢£¤¥ to highlight “System Application.” Then press «.
• Use ¢£¤¥ to highlight “Numbering Plan 4.” Then press «.
• Use
¢£¤¥ to highlight the database item “External Pager – Length” if the length of this code is to be
changed.
• Press
« until the appropriate length displays.
Or…
• Use
¢£¤¥ to highlight the directory number code that is to be changed, External Pager – Leading 1,
2 or 3.
• Press «.
• Input the new code and then press
« to temporarily store this data.
See Flexible Numbering Plan for rules of directory number application.
• When you have completed all changes, press the ° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.