Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-126
• Select Programming from the PC-DBA menu. Then press
«.
• Use ¢£¤¥ to highlight “System Application.” Then press «.
• Use
¢£¤¥ to highlight “Extension Copy.” Then press «.
• Select the appropriate copy technique:
“Individual” to copy programming from one extension to other extensions, one extension at a time.
”Group” to copy programming from one extension to a group of extensions, one group at a time.
• Press
«. The cursor is positioned on the Source database item.
• Input the Source extension directory number.
• Press
«. The cursor advances to the next database item input area “Destination DIR No.”
• Input the directory number of the Extension (if Individual) or Extension Pickup Group (if Group) for which the
source extension data is to be copied.
• Press «. (Note: The copy is performed at this time. There is no “are you sure” prompt given.) When the
copy function is completed the cursor is positioned to accept another directory number for which to copy the
data again. Continue entering destination directory numbers,
Or…
• Press the ESC (escape) key. At this time you may enter a new source extension directory number and
complete the process for another extension or group of extensions.
• To exit this database-programming screen, press the ESC (escape) key again. You will see the prompt:
“Exit This Feature”; press “Y” for yes.
• Continue making other programming changes or exit PC-DBA programming.
Note: changes made via PC-DBA are NOT updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming Guide section of this manual to learn more about
this procedure.
Extension Swapping
As part of the Flexible Numbering Plan in the DX-80 system, extension directory numbers (as defined in the database
programming) can be exchanged (swapped) from one port to another. This feature can be used to simplify moves
and changes of extensions at any specific location. When extension directory numbers are swapped from one port to
another, the associated programming is moved with the extension number.
Related Programming
Extension - DIR number Swapping, DSS Unit
Conditions
Extension directory numbers can only be swapped with valid (numbering plan defined) extension directory
numbers.
Programming Abstract
Use Extension Swapping (Directory Number Swapping) to exchange directory numbers of one extension
port with another extension port.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.