Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-125
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
Individual Copy mode (copy one “source” extension data to other extensions one-at-a-time):
• Input 08-12-01, then press [
save
savesave
save]. This advances to the INDIVIDUAL COPY programming screen.
• Press [
show
showshow
show]. This advances to the COPY FROM screen.
• Input the “source” extension directory number.
• Press [
save
savesave
save]. This advances to the COPY TO screen.
• Input an extension directory number where this data is to be copied, then press [save
savesave
save].
• The
COPY TO screen is immediately prompted again and the data may be copied again to other
extensions. Repeat the process for all extensions to be copied with this data.
• Press
the Hold button to exit Individual Copy programming and return to the previous menu level.
• Continue making other programming changes or exit the programming mode.
Group Copy mode (copy one “source” extension data to many other extensions via Pickup Group
association):
• Input 08-12-02, then press [save
savesave
save]. This advances to the GROUP COPY programming screen.
• Press [
show
showshow
show]. This advances to the COPY FROM screen.
• Input the “source” extension directory number.
• Press [
save
savesave
save]. This advances to the COPY TO screen.
• Input a Pickup Group directory number associated to the extensions where this data is to be copied, then
press [
save
savesave
save].
• The
COPY TO screen is immediately prompted again and the data may be copied again to another group
of extensions via another Pickup Group directory number. Repeat the process for all extension Pickup
Groups to be copied with this data.
• Press
the Hold button to exit Individual Copy programming and return to the previous menu level.
• Continue making other programming changes
Or…
• Press
the Hold button to return to the previous menu level or press the Volume button to return to the DB
Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.