Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-122
• Press
the Hold button to return to the previous menu level or press the Volume button to return to the DB
Item Selection screen or exit programming.
• (Extension Passwords are changed at the extension only via the Phone Lock feature.)
• Continue making other programming changes or exit the programming mode.
To view Extension passwords: (from the DB Item Select screen)
• Input 04-04-02-101~156.
• Press [
save
savesave
save]. The selected extension password displays.
• Press [back
backback
back] or [next
nextnext
next] to input another extension number and repeat the above operations to view other
extension passwords.
• Press
the Hold button to return to the previous menu level or press the Volume button (up or down) to
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use ¢£¤¥ to highlight “System Resource.” Then press «.
• Use
¢£¤¥ to highlight “User Password.” Then press «.
Program User Password Length:
• Use
¢£¤¥ to highlight User Password Length, then press «.
• Input the User Name Password Length (4-8), then press
«.
Program Extension Password(s):
• Use
¢£¤¥ to highlight the extension password to be changed and press enter.
• Input the new numeric password then press «.
• When you have completed all changes, press the ° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.