Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-113
• Use
¢£¤¥ to highlight “Category 2.” Then press «.
• Use ¢£¤¥ to highlight the database item “CO Ring Type” for the CO Line to be changed.
• Press
«. Each time that enter is pressed the value of this database item is updated.
• When you have completed all changes, press the
° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Distinctive Ringing – Extension )7
Distinctive Ringing – Extension provides a means for denoting one ringing extension from another. There are eight
(8) choices are available for an extension to choose.
Related Features
CO Line – Answering Position Transfer
Distinctive Ringing – CO Line
Default Settings
Distinctive Ringing is set to 1. (Range is 1~8.)
Operation
1. Press the Distinctive Ringing Tone code !)7.
2. The current Tone is heard and the setting displays
RING TYPE :1
chg
3. Press [chg
chgchg
chg] until the appropriate tone is heard and displayed.
Conditions
a) CO Line – Distinctive Ringing overrides an extensions setting of Distinctive Ringing.
b) The Distinctive Ringing code may be programmed on any available Feature button.
Default Settings
CO Line – Category 2 – CO Ring Type is set to “0” for all CO Lines. (Range is: 0-8.)