Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-112
Distinctive Ringing – CO Line
Distinctive Ringing – CO Line provides a means for denoting one CO Line from another while ringing. The distinction
provided is a tone allocation used to denote one CO Line from another. Eight (8) choices are available for CO Line
ringing.
Related Features
CO Line – Answering Position Transfer
Distinctive Ringing – Extension
Related Programming
System Application - Operator Code
Default Settings
CO Line – Ring Type = 0. (Range is 0~9.)
Conditions
a) CO Line – Distinctive Ringing overrides an extensions setting of Distinctive Ringing.
b) A CO Line set as Ring Type “0” has no specific ring type and follows Distinctive Ringing – Extension
settings.
Default Settings
CO Line – Category 2 – CO Ring Type is set to “0” for all CO Lines. (Range is: 0-8.)
Programming Abstract
Program the CO Line(s) for the CO Ring Type. Type “0” indicates this CO Line has no distinctive ringing
assignment and will follow the ringing Type of the Extension(s) that ring for this CO Line.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code !+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
• Input 02-740~755-11, then press [
save
savesave
save]. This advances to the CO RING TYPE programming screen for the
CO Line selected (CO Line 1=740 ~ CO Line 16=755).
• Press [
chg
chgchg
chg] until the appropriate value for this data item displays.
• Press
the Hold button to return to the previous menu level or press the Volume button to return to the DB
Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use
¢£¤¥ to highlight “CO Line.” Then press «.