Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-109
Related Programming
System Resource – DSS Allocation – DIR #
System Resource – DSS Allocation – DSS Owner
Feature Key Programming – DSS Set
Operation
When a DSS Console has been assigned to operate with your extension, use the feature buttons of the
console in the same way that the 30 programmable buttons of the telephone are used. Refer to each feature
description for specific operations.
Conditions
a) 12 maximum DSS Consoles can be assigned in the DX-80 system.
b) DSS Consoles can be programmed with numbering plan directory numbers only (no Feature access codes
can be programmed on DSS Console buttons.)
Default Settings
System Resource – DSS Allocation – No ports assigned as DSS Consoles, no ports assigned as DSS
Console Owner extensions. (Range: any valid extension port Directory Number.)
Feature Key Programming – reference the Specifications section of this manual to review the default map of
DSS Console buttons.
Programming Abstract
• Program the associated digital port as a DSS Allocations – DSS Dir Number.
• Program the digital extension as the DSS Console Owner.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
Program DSS Owner (04-14-1-01~12):
• Input 04-14-1-01~12, then press [
save
savesave
save]. This advances to the DSS Allocation programming screen for the
DSS Console selected (1~12).
• Press [
save
savesave
save]. This advances to the DSS Owner screen and displays the current contents.
• Press [chg
chgchg
chg] to change the DSS Owner (the extension for which this DSS is to operate).
• Input the extension and then press [
save
savesave
save].
• Press [next
nextnext
next] to advance to the next data item, DIR NUMBER.
• Press [chg
chgchg
chg] to change/enter the digital port directory number where the DSS is connected.
• Input the directory number of the digital port where the DSS Console is connected, then press [
save
savesave
save].
• Press [
save
savesave
save].
• Press [
next
nextnext
next] to enter more DSS Console data.
• Input the next DSS Unit number (1~12) to program.
• Press [
show
showshow
show].
• Follow the convention above for all DSS Console programming.