Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-104
EXTENSION
CO LINE
CALL HANDLING
SYS RESOURCE
RESTRICTION
EXT APPLICAT.
CO APPLICAT.
SYS APPLICAT.
Example: To skip to the Extension Application section of Database Administration, input “05” at the
Database Item Select screen and then press [
save
savesave
save].
Exit Database Administration:
• To exit Database Administration press the ON/OFF button twice. Or lift and replace the handset in the hook-
switch cradle.
Change Database Administration Password:
• Enter Database Administration using the feature code !+* and then enter the DB Admin password
++++++++. (Default password.) (Note: “+” is the equivalent of entering a space, so
the default password is 8 characters.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
Note: 1. All database programming items are indexed for fast access.
2. Use the Volume button (up or down) to return to the DB Item Select.
• Input 04-01. Then press [
save
savesave
save]. This advances to the System Resources – DB PSWD screen. The current
password displays (default is all spaces {blanks}).
• Press [
chg
chgchg
chg] to change the password.
• Input the new eight-character, alphanumeric password using the table below as a guide to characters.
• Press [save
savesave
save].
• Continue making other programming changes or exit the programming mode.
Default Set !69
When an extension user has invoked several features on his or her extension, it may be necessary to clear all
settings and return the telephone set to the factory condition. The Default Set code is used to perform this operation.
Operation
1. Press !69.
The display shows the following screen to confirm the intention:
DEFAULT SET
go
2. Press [go
gogo
go] to invoke the operation.
You hear the confirmation tone and the operation is complete.
Conditions
The following extension parameters are reset to the value shown:
LNR = empty
SNR = No Saved Number
Memo = No Saved Number