Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-103
F10 – RS232C
• F10-RS232C is the utility to setup the PC COM port. To successfully setup the PC COM port you must know
how the PC hardware is configured. In this utility you must select the COM Port number (1 or 2 supported)
and the baud rate that will be used for the connection. At default PC-DBA is setup to use COM Port 1 at
9600 bps. (9600 bps matches the default baud rate set for the DX-80 CPM – PC-DBA Port.)
• While using a modem connection it is best to set the COM port baud rate at 2400 bps since this is the speed
of the DX-80 Optional Modem. (Setting this speed can expedite the modem negotiation process since
compression link choices will not be attempted.)
Database Administration – Via Any Digital Extension !+*
The DX-80 system allows the user/installer to administer system database parameters via any DX-80 digital
telephone. It is possible to program the DX-80 system while the telephone is in use; however, certain button
operations are changed for the purposes of programming and cannot be used for telephone call processing.
Therefore, we don’t suggest using these features simultaneously unless you have been directed to do so by the
servicing technician.
Default Settings
Database Administration Password is set at ++++++++ (eight “+”). (Range is: any
combination of alphanumeric characters using the conventions of Extension/CO Line Name.)
Programming Abstract
• Enter the Database Administration to change any programmable system setting.
• Change the default password if necessary.
Enter the Database Administration mode at any Digital Extension:
• Press !+* to enter Database Administration. The system then prompts for the system Database
Administration password.
• Input the password:
++++++++, then press [show
showshow
show]. (“show
showshow
show” is a LCD Interactive
button.)
• When the correct password is successfully input, Database Administration is entered.
LCD Interactive buttons:
The LCD Interactive buttons are essential to complete database programming tasks. These buttons take on
many functions while in the Database Administration mode. Throughout the programming instructions, the
associated LCD Interactive button operation is indicated within square brackets [ ]. LCD Interactive buttons
include the following:
[back
backback
back] move back one database item or database item parameter
[next
nextnext
next] move to the next database item or database item parameter
[
show
showshow
show] show the contents of the current database item or parameter
[
chg
chgchg
chg] change the contents of the current database item or parameter
[
bksp
bkspbksp
bksp] used during data input to “backspace” over input data and re-input new data
[save
savesave
save] used to save input data
Database Item Select:
After you enter the correct password and press [show
showshow
show] (see Enter DB Admin mode above), the DX-80
Database Administration opens and the Database Item Select screen displays. This screen allows the
programmer to skip to the necessary database item for immediate programming of that item. Each database
item is indexed for this purpose. Details of the indexing are available in the DX-80 Programming Guide and
in the programming instructions of each feature description in this manual. These are the first level indices: