Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-102
Special Notes:
1. Initializing all PC-DBA parameters can be accomplished when a new system has been installed
(hardware Cold Start performed) by F4-Connecting to the DX-80 processor and then performing F3-
Receive All.
2. Initializing all PC-DBA parameters can be accomplished at the DOS prompt in the working
directory by copying all “DEF” extension files to all “DAT” extension files. The following DOS
command is used: “COPY *.DEF *.DAT.”
F9 – Modem
• Remote connection to the DX-80 system is possible via modem. The optional modem may be purchased
allowing remote administration of the DX-80 system database. The default directory number of the modem is
199. Some working knowledge of modem operation and connection is useful.
To establish a modem connection
• Make sure that the attendant at the site location is aware that a modem connection will be taking place. (Use
of the automated attendant can greatly assist the modem connection process by removing the human
element at the site location.)
• Press F9-Mdm. The following modem control screen displays:
+--------------------------------------+
¦ MODEM ¦
+--------------------------------------¦
¦ Connect ¦
¦ Disconnect ¦
+--------------------------------------+
• Use ¢£¤¥ to select Connect, then press «. The following modem control string displays:
+----------------------------------------+
¦ MODEM Connect ¦
+----------------------------------------¦
¦ Input MODEM control string : ¦
¦ ATX1E0Q0V0&C1&D2&H0&I0&K0&M0&N3....... ¦
+----------------------------------------+
• If your modem requires some different control string, input that string now. Then press «.
+----------------------------------------+
¦ MODEM Connect ¦
+----------------------------------------¦
¦ Input dial number: ¦
¦ ...................................... ¦
+----------------------------------------+
• Input the telephone number to dial (at the site location). Then press «.
+----------------------------------------+
¦ MODEM Connect ¦
+----------------------------------------¦
¦¦
¦ Waiting ¦
+----------------------------------------+
• Dialing begins and then the modems negotiate connection. A successful negotiation results in the following
confirmation display:
+----------------------------------------+
¦ MODEM Connect ¦
+----------------------------------------¦
¦¦
¦ Connect Succeed ¦
+----------------------------------------+
• The connection is also noted with an icon that appears in the upper left corner of the display: [Mdm].
• Once a modem connection has been accomplished, F4-Connect is possible. F4-Connect is required to link
PC-DBA to the DX-80 system processor.