Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-96
• Press
« to enter into the Programming and Maintenance functions of PC-DBA. The PC-DBA screen is
now shown with the cursor positioned on “Programming.”
+--------------------+
¦ PC-DBA ¦
+--------------------¦
¦ Programming ¦
¦ Maintenance ¦
+--------------------+
• Press « to enter into the Database Programming screen. The Database Programming screen displays
with the cursor positioned on “Extension.” All of the various programming parameters of the system are
accessed from this main screen.
• During all PC-DBA programming operations, changes to the DX-80 database are stored in the working
directory
not in the DX-80 system memory.
Note: Data in the working directory is only updated to the DX-80 system via the PC-DBA – SEND
operation.
+------------------------------+
¦ Database Programming ¦
+------------------------------¦
¦ Extension ¦
¦ CO Line ¦
¦ Call Handling ¦
¦ System Resource ¦
¦ Restriction ¦
¦ Extension Application ¦
¦ CO Line Application ¦
¦ System Application ¦
¦ Feature Key Programming ¦
¦ KSU DB Password ¦
+------------------------------+
• Use ¢£¤¥ to highlight the category of your choice then press « to open that category and begin
programming database parameters as required.
• Use ¢£¤¥ to highlight the various menu levels and database parameters. Then press « to open
that level/parameter.
• There are many menu levels within Database Programming. It is often necessary to use
³ and ´ to view
all elements of some categories.
• Use ° to exit one category and return to the previous level.
• When all changes in a category have been made press the
° (escape) key to exit that database
programming screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to move up through the menu levels.
• You may continue making other programming changes,
Or…
• Exit PC-DBA programming, to do so:
• Continue pressing ° (escape) until the “Main” menu is again in view.
• Use
¢£¤¥ to highlight “Exit to DOS.” Then press «.