Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-87
accessibility for the specific purpose of its connection. (Typical use would include connection of ancillary paging
equipment.)
Related Features
Class of Service – Station External Paging
Related Programming
CO Line - CO Line Type
Extension - Class of Service
Restriction - Toll Restriction
Default Settings
At default CO Line Type is set to “CO” for all CO Lines.
Programming Abstract
Program CO Line Type for each CO Line circuit according to its use requirement.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
• Input 02-740~755-08 then press [save]. The CO Line Type displays for the CO Line selected.
• Press [chg
chgchg
chg] until the appropriate CO Line Type displays.
• Press
the Volume button (up or down) to return to the DB Item Select screen and another CO Line number
for programming or exit the program mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use
¢£¤¥ to highlight “CO Line.” Then press «.
• Use
¢£¤¥ to highlight “Category 1.” Then press «.
• Use
¢£¤¥ and ³´ to highlight the CO Line Type for the CO Line to be changed.
• Press until the « appropriate value displays.
• When you have completed all changes, press the
° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.