Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-85
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
CO Line Signaling / Dialing Type (Tone/Pulse)
CO Lines may be designated as Pulse Dial or DTMF (Touch Tone®) Dial types. This setting will determine how
telephone number dialing is delivered to the telephone company.
Related Features
Pulse to DTMF Conversion
Operation
Dialing is delivered according the programming of each CO line while a user dials the telephone number.
Conditions
A CO Line that is marked as Dialing Type “Pulse” can be temporarily forced to Tone mode for use with
automated answering devices etc. using the Pulse to DTMF Conversion feature
*.
Default Settings
All CO Lines are assigned to signal in DTMF (Tone) mode.
Programming Abstract
Program CO Lines for Pulse dialing or Tone (DTMF) dialing as required.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
• Input 02-ccc-07 (where “ccc” = the CO Line directory number to be programmed).
• Press [chg
chgchg
chg] to select Tone or Pulse dialing mode.
• Press
the Volume button (up or down) to return to the DB Item Select screen to input a new CO Line
number.
• Continue making other programming changes or exit the programming mode.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.