Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-83
Related Features
Class of Service – Extension Night Service Activate (F63)
Class of Service – System Tenant Groups
Automatic CO Line Ringing Modes
Related Programming
CO Line – Answering Position – Day, Eve assignments.
System Application – Time Switching
Operation – at the Attendant Extension
1. While the attendant extension is idle, press the Ringing Mode feature access code !63. The system
prompts for the Extension password.
2. Input the password (default 9999). The mode of operation is then advanced sequentially.
3. Repeat the process to continue the advance of modes.
Operation – at Any Digital Extension Using the Attendant Password
1. While the extension is idle, press the Attendant Administration code !/0. The system prompts for
the Tenant Group to enter.
2. Input the Tenant Group (typically “1”) and then press [
save
savesave
save]. The system then prompts for the Attendant
Extension password.
3. Input the password (default for Tenant 1 is “9999”), then press [
show
showshow
show]. The system shows SVC MODE
CHANGE in the display.
4. Press [show
showshow
show]. The current mode of operation displays.
5. Press [chg
chgchg
chg] until the appropriate mode displays.
6. Lift and replace the handset or press the ON/OFF button twice to exit Attendant Administration.
Conditions
a) This function can only be operated at the attendant extension.
b) The feature access code can be assigned to an available Flexible Feature Button at the attendant extension
with the Attendant Extension Password to allow one button operation.
!63 + 9999.
c) The display of all digital telephones will indicate the current Ringing Mode of operation. The prompts
EVE
EVEEVE
EVE
and ALT
ALTALT
ALT above the center LCD Interactive button indicate these active modes. The DAY mode is indicated
by the absence of the other indicators.
Default Settings
CO Line – Answering Position – Day and Eve = 101.
(Range is 101~156, 410~433, 700~729.)
System Application – Time Switching (See Automatic CO Line Ringing Modes.)
Programming Abstract
Program each CO Line for the ringing position(s) (Answering Positions) required.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.