Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-76
• Use
¢£¤¥ to highlight “System Application.” Then press «.
• Use ¢£¤¥ to highlight “CO Line Copy.” Then press «. The CO Copy menu displays.
Copy CO Line(s) via Individual (one at a time) programming method:
• Use ¢£¤¥ to highlight “Individual.” Then press «. The cursor is immediately positioned on the
Source CO Line Directory number input.
• Input the CO Line directory number of the CO Line that has been programmed for copying to other CO
Lines.
• Press
«. The cursor immediately moves to the Destination Directory number input area.
• Input the CO Line directory number (740-755) where the copy data should be stored.
• Press
«. The cursor moves to the next input position allowing entry of the next CO Line Directory
Number. The previous entry remains displayed.
• Continue inputting CO Line directory numbers for those CO Lines where the copy data should be
stored, pressing
« after each input directory number.
• When all CO Lines to be copied with the copy data have been input press the ESC (escape). At this
time it is possible to input another “Source” CO Line directory number and continue the process for
another CO Line(s).
Copy CO Line(s) via Group (many at a time) programming method:
• Use
¢£¤¥ to highlight “Group.” Then press «. The cursor is immediately positioned on the
Source CO Line Directory number input.
• Input the CO Line directory number of the CO Line that has been programmed for copying to other CO
Lines.
• Press «. The cursor immediately moves to the Destination Directory number input area.
• Input the CO Line Group directory number (9, 800-806) where the copy data should be stored.
• Press
«. The cursor moves to the next input position allowing entry of the next CO Line Group
directory number. The previous entry remains displayed.
• Continue inputting CO Line Group directory numbers for those CO Lines where the copy data should be
stored, pressing
« after each input directory number.
• When all CO Lines to be copied with the copy data have been input press the ESC (escape). At this
time it is possible to input another “Source” CO Line directory number and continue the process for
another group of CO Line(s).
• When you have completed all changes, press the
° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.