Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-75
Copy CO Line(s) via Individual (one at a time) programming method. (08-11-01):
• Input 08-11-01.
• Press [
save
savesave
save]. This advances to the Individual CO Line Copy screen.
• Press [show
showshow
show]. The system prompts for the CO Line that should be copied; “COPY FROM.”
• Input the CO Line directory number of the CO Line that has been programmed for copying to other CO
Lines.
• Press [
save
savesave
save]. The system prompts for the first CO Line directory number where the source data is to be
copied; “COPY TO.”
• Input the CO Line directory number (740-755) where the copy data should be stored.
• Press [save
savesave
save]. The system prompts for the next directory number where the source data is to be copied;
“COPY TO” again.
• Continue inputting CO Line directory numbers for those CO Lines where the copy data should be stored.
• Press [
save
savesave
save] for each input directory number.
• When finished programming CO Lines via the Individual Copy function, press
the Volume button (up or
down) to return to the DB Item Select screen.
Or…
• Press
the Hold button to return to the previous database menu. Then use [back
backback
back] or [next
nextnext
next] to skip to the
appropriate database item.
Copy CO Line(s) via Group (many at a time) programming method. (08-11-02):
• Input 08-11-02.
• Press [
save
savesave
save]. This advances to the Group CO Line Copy screen.
• Press [show
showshow
show]. The system prompts for the CO Line that should be copied; “COPY FROM.”
• Input the CO Line directory number of the CO Line that has been programmed for copying to other CO
Lines.
• Press [save
savesave
save]. The system prompts for the CO Line Group directory number where the source data is to be
copied; “COPY TO.”
• Input the CO Line Group directory number (9, 800-806) where the copy data should be stored.
• Press [
save
savesave
save]. The copy data is stored in all CO Lines that are part of that CO Line Group. At this time the
system prompts for the next CO Line Group directory number where the source data is to be copied; “COPY
TO” again.
• Continue inputting CO Line Group directory numbers where the copy data should be stored.
• Press [
save
savesave
save] for each input directory number.
• When finished programming CO Lines via the Group Copy function, press (volume up or down) to return to
the DB Item Select screen. Or… press HOLD to return to the previous database menu. Then use [
back
backback
back] or
[
next
nextnext
next] to skip to the appropriate database item.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.