Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-73
CO Line Name / Label Programming
Naming (or labeling) of CO Lines is provided to customize the appearance of the line identifier in the telephone
display when the CO Line is in use. This labeling can assist users when handling CO Line calls by orienting the line to
its intended purpose.
Default Settings
System Resource – CO Line Names; CO Lines are named “LINE 1” through “LINE 16” for CO Line directory
numbers 740-755 sequentially.
Programming Abstract
Program – CO Lines as required for customized names. (7 characters maximum)
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
Program CO Lines for Customized names. (Index 04-06-ccc, where “ccc” = the CO Line Directory number
[740-755]):
• Enter 04-06-ccc to program “ccc” CO Line name/label for the display.
• Press [
save
savesave
save]. This advances to the selected CO Line Name/Label database item and shows the current
name/label programmed.
• Press [
chg
chgchg
chg] to input a new name/label.
• Use the dial pad buttons and the table below to input the name/label for the CO Line. (Important: the
+
button acts as an enter key. It must be pressed after each character is input to temporarily store that
character in the position. + is also used to enter a space.)
• Press [
save
savesave
save] to save the new name/label programming.
• Press [next
nextnext
next] to enter another CO Line directory number for programming.
• When finished programming CO Line Name/Labels, press
the Volume button (up or down) to return to the
DB Item Select screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use
¢£¤¥ to highlight “System Resource.” Then press «.
• Use ¢£¤¥ to highlight “CO Line Names.” Then press «. The CO Line directory number (740-755)
is listed along the left side of the display. The current name/label programmed is listed adjacent to each
directory number.