Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-72
• Use
¢£¤¥ to highlight Call Abandon for the appropriate CO Line. (CO Lines are listed along the left
side of the display.)
• Press
« until the appropriate value displays.
• Continue programming other database items as required.
• When you have completed all changes, press the
° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
Program Call Abandon Timers as required to match the CO operation.
• Use
¢£¤¥ to highlight “Call Handling.” Then press «.
• Use
¢£¤¥ to highlight “Category 1” and then press «. (Notice the display header “Call Handling –
Category 1 : [1/2].” The “[1/2],” indicates that this is the first of two pages for this programming category.)
• Press ³ or ´ to select page 2.
• Use ¢£¤¥ to highlight the database item requiring change (Talk or Hold Abandon Time).
• Press
« to change the data.
• Input the new data for this database item. (Accepted entries are 50-1000, in increments of 50.)
• Press « to temporarily store this data.
• Use
¢£¤¥ to highlight the next database item to be changed.
• Continue programming other database items as required.
• When you have completed all changes, press the
° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.