Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-71
Program CO Lines for Call Abandon. (02-ccc-09, where “ccc” = the CO Line Directory number [740-755]):
• Input 02-ccc-09 to program “ccc” CO Line – Call Abandon.
• Press [
save
savesave
save]. This advances to the selected CO Line Call Abandon setting for CO Line “ccc.”
• Press [chg
chgchg
chg] until the appropriate value (Y/N) displays for this CO Line.
• Press
the Volume button (up or down) to return to the DB Item Select screen and input another CO Line.
Or…
• Press the
Hold button to select another CO Line to be programmed.
• Input the CO Line number then press [show
showshow
show].
• Press [next
nextnext
next] to advance through database items until the Call Abandon database item displays.
• When finished programming CO Line Call Abandon, press
the Volume button (up or down) to return to the
DB Item Select screen.
Or…
• Use [
back
backback
back] or [next
nextnext
next] to skip to the appropriate database item.
Program Call Abandon Timers as required, to match CO operation. (03-41 and 03-42):
• At the DB Item Select screen input 03-41 for Talk Abandon (Call Abandon during conversation “talk” mode.)
Or…
• 03-42 for Hold Abandon (Call Abandon during on hold mode.)
• Press [
chg
chgchg
chg].
• Input the value for this database item. (Accepted entries are 50-1000, in increments of 50 milliseconds.)
• Press [save
savesave
save].
• To select the previous or next database item, press [back
backback
back] or [next
nextnext
next].
• When finished programming Call Abandon database items, press
the Volume button (up or down) to
return to the DB Item Select screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
Program CO Lines for Call Abandon:
• Use ¢£¤¥ to highlight “CO Line.” Then press «.
• Use ¢£¤¥ to highlight “Category 1.” Then press «. (Notice the display header “CO Line Category
1 : [1/2].” The “[1/2],” indicates that this is the first of two pages for this database programming. Page 1
shows the programmable database items for CO Line ports 1-8 (CO Lines 740-747).)
• Use the
³ and ´ buttons on the PC keyboard to select the screen of Category 1 that show the CO
Line(s) to be programmed.