Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-68
• Press [
chg
chgchg
chg] until the appropriate CO Line Group displays for this CO Line.
• Press
the Volume button (up or down) to return to the DB Item Select screen and input another CO Line
Or…
• Press the
Hold button to select another CO Line to be programmed.
• Press [show
showshow
show].
• Press [next
nextnext
next] twice to advance to the CO Line Group programming for the CO Line selected.
• When finished programming CO Line Groups, press
the Volume button (up or down) to return to the DB
Item Select screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
• Use
¢£¤¥ to highlight “CO Line.” Then press «.
• Use ¢£¤¥ to highlight “Category 1.” Then press «. (Notice the display header “CO Line Category
1 : [1/2].” The “[1/2],” indicates that this is the first of two pages for this database programming. Page 1
shows the programmable database items for CO Line ports 1-8 (CO Lines 740-747).)
• Use the
³ and ´ buttons on the PC keyboard to select the screen for the CO Line(s) to be programmed.
• Use ¢£¤¥ to highlight the CO Group assignment for the appropriate CO Line. (CO Lines are listed
along the left side of the display.)
• Press « to change the data item value.
• Input the appropriate CO Line Group number (1-8) then press
« to store the data.
• Continue programming other database items as required.
• When you have completed all changes, press the
° (escape) key to exit this database programming
screen. You will see the prompt: “Exit This Feature”; press “Y” for yes.
• You will then be prompted to “Save Current Setting?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” to save changes.
• If you press “Y” (yes), you will then be prompted “File Exists, Override?”
• Press “N” to abort changes and leave all data unchanged.
• Press “Y” (yes) to continue with the save operation.
• Press
° (escape) again to return to the Database Programming menu.
• Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a “SEND” function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.