Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-65
c) Tenant Group programming of extensions and CO Lines also dictates which CO Lines an extension can
access. See Tenant Group.
Default Settings
All DX-80 extensions are allowed access to all equipped (hardware installed) CO Lines.
All CO Lines are assigned in Tenant Group 1. (Range is 1-3.)
All CO Lines are assigned in CO Line Group 1. (Range is 1-8.)
Programming Abstract
Program the required extensions for Line (CO Line) Access per CO Line.
Programming via the DET (Digital Extension Terminal)
Note: [back
backback
back], [next
nextnext
next], [show
showshow
show], [chg
chgchg
chg], [bksp
bkspbksp
bksp], and [save
savesave
save] are LCD interactive button operations. Use the
three buttons below the LCD display to actuate the associated operation.
• Enter Database Administration using the feature code
!+* and then enter the DB Admin password
“
++++++++.” (Note: This eight-character password can be changed.)
• Press [
show
showshow
show]. The DB Item Select screen displays.
Program extensions for CO Line Access. (01-101~156-23-01~16):
• Enter 01-xxx-23-yy to program “xxx” Extension for “yy” CO Line access.
• Press [
save
savesave
save]. This advances to CO Line Access for extension “xxx” and CO “yy.”
• Press [chg
chgchg
chg] until the appropriate value for this database item displays (Y/N).
• Press
the Volume button (up or down) to return to the DB Item Select screen and input another
extension and CO Line
Or…
• Press [
back
backback
back] or [next
nextnext
next] to select the previous or next sequential CO Line for the selected extension.
• Press [chg
chgchg
chg] until the appropriate value for this database item displays.
• When finished programming CO Line Access, press
the Volume button (up or down) to return to the DB
Item Select screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu. Then press
«.
Program CO Line Access:
• Use
¢£¤¥ to highlight “Extension.” Then press «.
• Use ¢£¤¥ to highlight “Line Assignment.” Then press «. (Notice the display header “Extension –
[1/05].” The “[1/05],” indicates that this is the first of five pages for this database screen. Page 1 is extension
ports 1-14 (Extensions 101-114).)
• Use the
³ and ´ buttons on the PC keyboard to select the page for the extension(s) to be programmed.