Specifications

DX-80 INSTALLATION AND MAINTENANCE MANUAL
P7290 IMM 3-63
Program CO Line Groups for Alternate CO Line Groups (Index 07-01-xx-03, where “xx” = the CO Line
Group for which Alternate Routing must be setup):
• Input 07-01-xx-03 to program Alternate Routing for CO Line Group “xx.”
• Press [
save
savesave
save]. This advances to Alternate CO Group.
• Press [
show
showshow
show]. The display shows ALTER. CO GP :_.
• Input the Alternate Route to program (1 for first alternate, or 2 for second alternate) for this CO Line Group.
• Press [
show
showshow
show]. The display shows CO GP NUMBER : x. (Where “x” is the current programming, “0”
means no alternate route.
• To change this Alternate Route selection, press [
chg
chgchg
chg].
• Input the CO Line Group that is to be used as the (1
st
or 2
nd
) Alternate Route for this CO Line Group.
• Press [save
savesave
save].
• Press [
next
nextnext
next] to advance to the Delete Digits for this Alternate Route selection.
• If it is necessary to delete digits from the dialed digits when calls are routed to this alternate, put in the
number of digits to delete here.
• Press [
chg
chgchg
chg]. Input the quantity of digits to delete from the beginning of the number dialed. (0-9)
• Press [save
savesave
save].
• Press [next
nextnext
next] to advance to the Inserted Digits for this Alternate Route selection.
• If it is necessary to insert digits before sending the dialed digits when calls are routed to this alternate, input
the actual digits required here.
• Press [
chg
chgchg
chg]. Input the required digits. (Up to 16 digits may be inserted.)
• Press [save
savesave
save].
• Press [next
nextnext
next]. The display shows “ALTER. CO GP :_.” The next Alternate Route may now be programmed
for this CO Line Group (if required).
• Input the Alternate Route to program (1 for first alternate, or 2 for second alternate) for this CO Line Group.
• Press [show
showshow
show] and continue programming as per the first alternate programming.
• When finished programming Alternate CO Line Routes, press
the Volume button (up or down) to return to
the DB Item Select screen. Or… use [
back
backback
back] or [next
nextnext
next] button to skip to the appropriate database item.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
• Enter PC-DBA by typing “DX-80” at the DOS prompt in the PC-DBA working directory and then pressing
«.
• Press any key at the program title page (as it requests) to enter the Main Menu.
• Select PC-DBA from the main menu.
• Select Programming from the PC-DBA menu.
• Use
¢£¤¥ to highlight “System Application.” Then press «.
• Use
¢£¤¥ to highlight “Category 2.” Then press «.
Program CO Line Groups for Alternate CO Line Groups:
• Use ¢£¤¥ to highlight “CO Line Application.” Then press «.
• Use
¢£¤¥ to highlight “Alternate CO Group.” Then press «. (Notice the display header “CO Line
Application - Alternate CO Group1: [1/2].” The “[1/2],” indicates that this is the first of two pages for this