User`s guide

7.4 Engaging Automatic Set Relocation
NOTE:If this feature has been enabled by your system programmer,
the message-waiting light will flash for several seconds when
you connect your telephone to another location. This means
that the system is waiting to automatically relocate your
extension number and other programmed features to the new
location.
If you do not want your telephone to have its old programming
after relocation, reject the automatic relocation.
•
To accept automatic relocation,
1. Do nothing and wait for the light to turn off on its own, or press the
HOLD button to immediately accept the relocation (light
immediately turns off).
•
To reject the automatic relocation,
1. Press the # button while the message waiting light is flashing.
7.5 Entering Account Codes
•
If you are required to enter an account code when making outside calls,
1. Select line.
2. Press INTERCOM and dial ✳ 04.
3. Dial your account, hear outside dial tone, and dial outside number.
4. When called party has answered, lift handset.
GCA70–281 Using The Other Telephone Features
LCD Speakerphone Station User's Guide 7 – 3