User`s guide

Making Calls
3.1 Making A Call
NOTE:If the installer has enabled your system with Specialized Route
Access (SRA), the system returns a special intercom tone when
youdialout(usingINTERCOM9,orapreprogrammedline
group 1 button). After this SRA tone, you have ten (10)
seconds to dial digits; otherwise, the telephone automatically
returns to its idle state. Furthermore, you only have three
seconds pause time between digits before the system
automatically dials your call.
•
To make a call,
1. Lift handset, select line (unless your telephone selects it for you),
or select intercom, and listen for dial tone.
2. Either dial number, or press HOLD and then, press autodial, use
speed dial feature, use redial feature, or press Direct Station Select
(DSS) if making an intercom call. If you are already on a call,
press HOLD twice to put your telephone on EXCLUSIVE HOLD
to prevent dialing in the person’s ear.
3.2 Using Speed Dial
•
To dial autodial number,
1. Press preprogrammed button. If button is programmed at the
second level of a DSS button, press SHIFT before pressing
autodial button.
2. When called party answers, lift handset.
3
GCA70–281 Making Calls
LCD Speakerphone Station User's Guide 3 – 1