User guide

Other Advanced Features
92 Comdial Feb ‘05
The EP100G-I12 speakerphone is equipped with an auxiliary jack
that provides an interface for a headset only. You must program one
of its programmable buttons to serve as an enable/disable button for
the headset.
The following modes are programmable with the auxiliary jack.
Note: The recorder, external ringer, or pager requires external
power.
• The headset mode allows you to operate your endpoint with a
headset instead of as a speakerphone, available with both the
L12 and I12 models. Note: This is the only auxiliary option
available on the EP100G-I12.
• The recorder mode allows you to send your voice and that of the
distant party to a tape recorder, available with the EP100G-L12
only.
• The ringer mode allows an external speaker to sound the ringing
of your endpoint, available with the EP100G-L12 only.
• The pager mode allows an external paging device to sound all
voice announcements (all-call, zone paging, voice announced
intercom calls) sent to your endpoint. This is available with the
EP100G-L12 only.
Program the enable/disable buttons (at any blank programmable
button location) as follows.
1. Select OPTIONS.
2. Select Programming.
3. Select NEXT until the Feature Button option appears.
4. Select Feature Button.
Auxiliary Jack Location