User guide

EP100G-L12 / EP100G-I12 User
Feb ‘05 Comdial 89
To interrupt the redialing procedure so that you can scroll through
numbers in your redial queue, perform the following steps.
1. While your endpoint is in the process of dialing a number,
select Auto Redial or the programmed AUTOMATIC REDIAL
button twice. This treats the number as answered, cancels auto-
matic redialing for that number, and puts the number back in the
automatic redial queue. The display shows the last number
dialed.
2. Choose from one of the following.
• Select REMOVE to remove the number from the redial queue.
• Select NEXT to scroll to the next number in the queue.
• Select EXIT to exit from the redial queue.
To cancel the automatic redial feature, choose one of the following.
• Perform any user activity at the station (go on-hook, select the
speaker button, etc.),
• Dial #72 to delete all numbers from the redial queue,
• Select Auto Redial or the programmed AUTOMATIC REDIAL
button while the number you wish to remove from the redial
queue is ringing.
7.5 Tracker Paging System
When installed with your system, the Tracker Paging System option
allows you to send call back and parked call messages to Tracker
pagers assigned to station extension numbers. Along with the parked
call message, the system parks the call in orbit for retrieval by the
paged party. The type of message that the system delivers (either
alphanumeric or numeric-only) is dependent upon the Tracker pager
model in use at the station. When outside callers call into a system
that has both a Tracker Paging option and a voice mail option
installed, the system gives these callers the option of either leaving a
message or tracking the person that they are calling.