User guide

Other Advanced Features
88 Comdial Feb ‘05
To use the automatic redial feature to
redial a busy or unanswered number,
perform the following steps.
1. While on the call, select Auto
Redial or press the AUTOMATIC
REDIAL button programmed by
your installer.
2. The system repeatedly dials the
number until you cancel the fea-
ture or the system has dialed the
number a preprogrammed num-
ber of times (determined by your
system installer).
The AUTOMATIC REDIAL light flashes between redials and
turns on steady during redialing.
3. If your installer has enabled answer supervision on your line,
the system automatically cancels automatic redialing and turns
the AUTOMATIC REDIAL light off.
If answer supervision is NOT enabled, select Auto Redial or
the programmed AUTOMATIC REDIAL button while on the
call to cancel automatic redialing,
4. If your system installer has enabled the redial multiple numbers
feature, you can have up to ten numbers in your redial queue.
To add numbers to your redial queue, repeat step 1.
To scroll through numbers in your redial queue if your endpoint is
currently idle, perform the following steps.
1. Select Auto Redial or the programmed AUTOMATIC REDIAL
button. The display shows the last number dialed.
2. Choose one of the following:
• Select REMOVE to remove the number from the redial queue.
• Select NEXT to scroll to the next number in the queue.
• Select EXIT to exit from the redial queue.
Initiating Auto Redial