User guide

Programming
76 Comdial Feb ‘05
8. Dial a number (up to 16 digits
long, including * and # if
needed).
9. Select DONE to store the num-
ber.
10. Repeat the previous steps until
all numbers are stored, or select
EXIT.
11. Press SPEAKER to end.
6.3 Feature Access Codes
In addition to the system features which may be programmed using
the interactive buttons, several other features may be programmed by
using their access codes. The feature codes are programmed like
speed dial numbers and can occupy the same programmable buttons
on your endpoint. Access codes are listed in Section A, Feature
Access Codes.
To store a system feature access code, perform the following steps.
1. Select OPTIONS.
2. Select Programming.
3. Select NEXT until the Feature Button option appears.
4. Select Feature Button.
5. Select the programmable button
where you want to store the fea-
ture. (Remember, if there is
anything else programmed at
this button, the new program-
ming overwrites it). For help in
Dialing a Speed Number