User guide

EP100G-L12 / EP100G-I12 User
Feb ‘05 Comdial 75
To store an outside number as a speed
dial number, perform the following
steps.
1. Select OPTIONS.
2. Select Programming.
3. Select NEXT until the Speeddial
option appears.
4. Select Speeddial to choose speed
dial programming.
5. Press a programmable button or
dial pad button (09) to choose storage location (remember, to
access second level storage at a programmable button, press
SHIFT first).
6. Select EDIT.
7. Make your speed dial route
selection choice from the list on
the LCD by pressing the appro-
priate button.
• Press a line button to select an
outside line,
• Dial 00 to select prime line or
last line used.
• Dial 01 to 16 to select line
group.
• Press INTERCOM button or
dial 8 to select intercom.
Note: You may need a pause between numbers to compensate
for differences in response time between your system and the
host system (ask your system administrator about this). To
store a pause, press HOLD, then continue dialing. If your sys-
tem is behind a host system that needs a hook flash to access a
feature, press TAP to store a hook flash, then continue dialing.
Selecting Line or Intercom