User guide

EP100G-L12 / EP100G-I12 User
Feb ‘05 Comdial 71
To receive a message at an alerted station, perform the following
steps.
1. Observe the flashing message
waiting light and the LCD mes-
sage indicating who called for
you.
2. Select CALL to dial the messag-
ing station automatically.
3. Select CLEAR to clear the mes-
sage from your station.
5.3 Response Message Delivery
By programming one or more RESPONSE MESSAGE buttons on
your LCD speakerphone, you can respond with a variety of messages
to many calling situations. A scrolling RESPONSE MESSAGE
button allows you to select from several different messages which
have been programmed by the system attendant. A fixed RESPONSE
MESSAGE button sends the same message you previously selected
each time you press it. (See Section 6.5, Response Message Button
for instructions on programming a dedicated RESPONSE MESSAGE
button.)
To send an LCD message when you call and receive busy signal or no
answer, perform the following steps.
1. While still on the call, press the appropriate RESPONSE MES-
SAGE button to send a preselected message to the other end-
point,
2. If a scrolling Response Messaging was programmed, continue
to press the RESPONSE MESSAGE button and dial # when
your display shows the message you wish to send.
Receiving a Message