User guide

Nonverbal Messaging
70 Comdial Feb ‘05
5.2 Message Waiting Light and
Messaging
If the system installer programs your EP100G-L12/EP100G-I12 to
allow message-wait originate, you can turn on the message-waiting
light of any other endpoint.
To turn on the message-waiting light (and a broken dial tone, if
installer programmed) at another station that is idle or busy, perform
the following steps.
1. Press INTERCOM.
2. Dial *3.
3. Dial the extension number or press a DSS/BLF button of the
station you want to alert. The message-waiting light of called
station then flashes.
You can also turn on the message-waiting light and broken dial tone
at another station when that station is busy.
1. Hear the busy tone and remain
on the line.
2. Select MESSAGE.
3. Hang up.
To turn off the message waiting light at
a busy or idle station, perform the fol-
lowing steps.
1. Press INTERCOM.
2. Dial #3.
3. Dial the extension number or
press a DSS/BLF button of station that was alerted. The mes-
sage-waiting light of called station then turns off.
To turn off the message-waiting light during message-delivering con-
versation, press INTERCOM once if off-hook, or twice if on-hook.