User guide

Advanced Call Handling
60 Comdial Feb ‘05
3. Remember the code for later use or make it known to those
who need to know it in order to retrieve the call.
To park a call using a programmed PARK button, while on the call,
press PARK. The system then places the call in a preselected park
orbit and lights the PARK light.
To retrieve a call that was placed on hold in the system (parked),
perform the following steps.
1. Press INTERCOM.
2. Dial #.
3. Dial the code for the orbit (910 to 999 for orbit 1099), or press
the programmed PARK button.
4.5.2 HANDLING PARK RECALLS
When a parked call times out of the system, it returns to your end-
point in the form of a park recall (you hear four short tone bursts at
12-second intervals).
To answer a park recall, select Answer. The system then connects the
call to your station.
To place a park recall on hold at your
station, select Hold. After the call
remains on hold for a period of time,
the system rings the call back to your
endpoint as a hold recall.
To re-park a park recall and restart the
park timer, answer/retrieve call. Then
select Park (the system places the call
back in its original park orbit where it
remains until it is answered or recalls
again).
A Park Recall