User guide

Making Calls
42 Comdial Feb ‘05
3.2.1 TONE FIRST
The following instructions assume a tone-first setting. You can
change a call to voice announce signaling for that call simply by
pressing the INTERCOM button again after dialing the extension
number or by pressing the DSS/BLF button again.
To manually cause the other end-
point to ring (tone calling), press
INTERCOM or select Dial by
Name. Then dial the extension
number (the called endpoint rings).
To tone call automatically, press
the DSS/BLF button (the called
endpoint rings).
3.2.2 VOICE FIRST
The following instructions assume a voice-first default setting. Any
user can change a call to a tone signaling for that call simply by
pressing the INTERCOM button again after dialing the extension
number or by pressing the DSS/BLF button again.
To voice announce manually, press
INTERCOM, dial the extension
number, and make your
announcement.
To voice announce automatically,
press the DSS/BLF button, and
make your announcement.