User guide

EP100G-L12 / EP100G-I12 User
Feb ‘05 Comdial 37
4. Speak toward the endpoint or lift the handset if you want
prvacy.
2.5.3 MONITORED STATION PICKUP
Your endpoint may have the personal intercom number of another
endpoint appearing at a programmable button location. You can use
the light associated with this button to monitor the status of that end-
point, and you can press the button to make a call to that endpoint if
you wish. The associated light is known as the Busy Lamp Field
(BLF) light, and the button is known as the Direct Station Select
(DSS) button. If the installer arranged for your endpoint to have the
station monitoring feature, the BLF light shows activity status at the
monitored endpoint.
To monitor another endpoint, observe the BLF light indications next
to the DSS/BLF button.
• Off = Station is idle.
• Flashing (if enabled) = Station has an incoming call.
• On = Station is busy.
Note: If you do not have the station monitoring feature, the BLF light
shows: Off = idle, On = busy.
To call an idle monitored station or to answer one that is ringing, note
the BLF light condition. Then press the assigned DSS/BLF button.
Speak toward the endpoint, or lift the handset if you want privacy.
Note: If you place this call on hold or if you transfer it to another
endpoint, the BLF light flashes a hold signal. You can retrieve the
call by pressing TAP.