User guide

EP100G-L12 / EP100G-I12 User
Feb ‘05 Comdial 31
2.2 Answering Intercom (Internal) Calls
An intercom call is one that is made from one system endpoint to
another. Your station receives intercom calls in one of two ways
depending upon system programming.
• In a voice-first setting, a short tone is followed by the caller’s
voice heard on the speaker.
• With a tone-first setting, the endpoint rings in a distinctive
pattern and you must take action to answer the call.
As with an outside call, your LCD screen displays the line number of
the incoming call (e.g.,
L123
) and any caller ID information that the
ringing line is programmed to receive.
When you hear an intercom tone followed by the caller’s voice, speak
toward the endpoint to answer, or lift the handset if you want privacy.
When you hear intercom ringing
(two short bursts), perform the fol-
lowing steps.
1. Press Intercom or select
Answer.
2. Speak toward the endpoint or
lift the handset if you want
privacy.
3. Select Do Not Disturb if you
do not wish to answer the
call at this time. Note: For more information on setting Do
Not Disturb at your station, see Section 7.3, Do Not Disturb
Condition.