User guide

EP100G-L12 / EP100G-I12 User
Feb ‘05 Comdial 29
2. ANSWERING CALLS
2.1 Answering Outside Calls
When an outside call rings at your station, the LCD screen displays
the system line number of the incoming call (e.g., L123) and any
caller ID information that your ringing line is programmed to receive.
In addition to simply lifting the handset, your other options for
answering the call are displayed above the interactive buttons.
When you hear outside ringing
(two long bursts) and observe an
orange
flashing light, perform the
following steps.
1. For speakerphone, press the
flashing line button or select
Answer and speak toward the
endpoint.
2. For privacy, lift the handset.
3. Select Do Not Disturb if you
do not wish to answer the
call at this time. (Selecting Do Not Disturb stops your end-
point from ringing but continues to send a ringing tone to the
caller.) The associated BLF continues to flash until the caller
disconnects.
When you hear outside ringing (two long bursts) and observe a red
flashing light, perform the following steps.
1. Press the flashing line button or select Answer.
2. Speak toward the endpoint or lift the handset if you want pri-
vacy.
3. Select Do Not Disturb if you do not wish to answer the call at
this time. Note: For more information on setting Do Not Dis-
turb at your station, see Section 7.3, Do Not Disturb Condition.
Outside Call on Line 339