User guide

EP100G-L12 / EP100G-I12 User
Feb ‘05 Comdial 25
1.4.4 SETTING A PERSONAL RING TONE
You can choose one of eight different ring tones for your endpoint.
When several endpoints are located close together, you may want to
choose a different personal ring tone.
To select one of the ring tones,
perform the following steps.
1. Select OPTIONS.
2. Select Programming.
3. Select NEXT.
4. Select Ring Tone interactive
button (to the right of the
LCD) to scroll through the
eight ring tones.
5. Select EXIT to end.
The next time your endpoint rings,
your EP100G-L12/EP100G-I12 uses the new ring tone.
1.4.5 SETTING VOLUME LEVELS
The volume control on your endpoint
is a multipurpose control you can use
to set the volume (loudness) of the
ringer, the speaker, and the handset.
There are four ringer loudness levels
(plus an off position).
To set the ringer loudness level,
perform the following steps.
1. While your endpoint is on-hook
and idle, press the VOLUME UP or VOLUME DOWN button
once for each change in loudness you desire. The ringer
sounds once for each change as an example of the current set-
ting.
2. Select SAVE to end.
volume up
volume down