User guide

EP100G-L12 / EP100G-I12 User
Feb ‘05 Comdial 101
2. Press INTERCOM.
3. Dial 70 through 77 for zones 18.
Note: Zone 1 (code 70) provides an all-call function in the
default mode.
4. Make your announcement.
5. Remain on the line if awaiting a reply (known as a Meet-Me
page), or hang up the handset.
At times other users may page you with instructions to meet them on
line—this is known as a Meet-Me page. You can go to the nearest
telephone, dial a code, and be in contact with the paging party.
To reply to a Meet-Me page, perform the following steps.
1. LIFT the handset of the nearest telephone.
2. Press INTERCOM.
3. Dial 78 to meet paging party on line.
7.14 Viewing The Call Log
The Call Log feature allows you to view the last 10 outgoing calls
made from your endpoint. If you have caller ID, the LCD also dis-
plays incoming calls. Incoming calls are designated with an I next to
the number and outgoing calls are designated with an O.
To view the call log, perform the following steps.
1. Select OPTIONS.
2. Select Call Log.
The LCD displays the last 10
phone numbers you dialed (or
the numbers that called you, if
you have caller ID). Incoming
calls are designated with an I to
the left of the number and outgo-
ing calls are designated with an
O.