User guide

CONVERSip EP100 User
Sept ‘04 Comdial 85
• Select NEXT to scroll to the next number in the queue.
• Select EXIT to exit from the redial queue.
To interrupt the redialing procedure so that you can scroll through
numbers in your redial queue,
1. While your telephone is in the process of dialing a number,
select ARDL or the programmed AUTOMATIC REDIAL but-
ton twice. This treats the number as answered, cancels auto-
matic redialing for that number, and puts the number back in
the automatic redial queue. The display shows the last number
dialed.
2. Choose from one of the following:
• Select REMOVE to remove the number from the redial
queue.
• Select NEXT to scroll to the next number in the queue.
• Select EXIT to exit from the redial queue.
To cancel the automatic redial feature, choose one of the following:
1. Perform any user activity at the station (go on-hook, select the
speaker button, etc...),
2. Dial #72 to delete all numbers from the redial queue,
3. Select ARDL or the programmed AUTOMATIC REDIAL but-
ton while the number you wish to remove from the redial
queue is ringing.
7.5 Tracker Paging System
When installed with your system, the Tracker Paging System option
allows you to send call back and parked call messages to Tracker
pagers assigned to station extension numbers. Along with the parked
call message, the system parks the call in orbit for retrieval by the
paged party. The type of message that the system delivers (either
alphanumeric or numeric-only) is dependent upon the Tracker pager
model in use at the station.