Programming instructions

Toll Restriction Override
You can override one station’s toll restriction assignment by dialing a
programmed four-digit TRO code at another station prior to dialing your desired
number. When you do this, the system replaces the toll restriction requirements
of the station that you are using with those that match your home station.
After entering a TRO code at another station, you will get your own prime line or
idle line preference and its accompanying toll restriction assignment. You then
have 15 seconds to dial an outgoing call. Once you hang up from a call, you have
15 seconds to make another call without re-entering your TRO code. If you
transfer a TRO call or place it on hold and pick it up at another station, the call
belongs to the new station.
·
To use TRO at a station,
1. PRESS INTERCOM,
2. DIAL
**6.
3. DIAL your station extension number.
4. DIAL your TRO code number ( aS is shown).
5. Within 15 second timeout period, DIAL desired outgoing line
number.
6. HANG UP handset OR PRESS SPEAKER to end call. You will
have 15 seconds in which you can make another call without
re-entering your TRO code.
·
To clear the TRO code,
1. PRESS INTERCOM,
2. DIAL
**6.
3. PRESS SPEAKER.
78 Attendant Manual - DSU II Digital Expandable System
Other Features GCA70-245