Programming instructions

Auxiliary Jack
NOTE: Some telephones have an auxiliary jack. All other model telephones use
the handset jack to plug in a headset.
The auxiliary jack provides an interface for a headset, a tape recorder, an external
ringer or an external pager. Any one of these auxiliary devices may be connected
by you or by your system installer. You must program one of the programmable
buttons to serve as an enable/disable button for each auxiliary device that is or
will be connected to your telephone.
The following modes are programmable with the auxiliary jack:
· The headset mode allows you to operate your telephone with a headset
instead of as a speakerphone. Lifting the handset will turn off the headset
and activate the handset.
NOTE: The recorder, external ringer, or pager requires external power.
· The recorder mode allows you to send your voice and that of the distant
party to a tape recording machine.
· The ringer mode allows an external speaker to sound the ringing of your
telephone.
· The pager mode allows an external paging device to sound all voice
announcements (all-call, zone paging, voice-announced intercom calls)
sent to your telephone.
74 Attendant Manual - DSU II Digital Expandable System
Other Features GCA70-245
Connectors On Bottom Of Telephone
Auxilliary
Jack
Line Cord
Handset
!
Auxiliary Jack Location