Programming instructions

Tracker Paging System
When installed with your system, the Tracker Paging System option allows you
to send call back and parked call messages to Tracker pagers assigned to station
extension numbers. Along with the parked call message, the system parks the
call in orbit for retrieval by the paged party. The type of message that the system
delivers (either alphanumeric or numeric-only) is dependent upon the Tracker
pager model in use at the station.
When outside callers call into a system that has both a Tracker Paging option and
a voice mail option installed, the system gives these callers the option of either
leaving a message or tracking the person that they are calling.
If you have a Tracker pager assigned to your personal intercom number, you can
receive messages that someone else sends you. The system automatically installs
the Tracker pager for your use; however, you can disable it when you do not wish
to receive paged messages and when you leave at the end of your day. Of course,
if you do disable your Tracker pager at the end of your day, be sure to enable it at
the beginning of your next day.
·
To enable a Tracker Pager at your station,
1. PRESS INTERCOM.
2. DIAL
*06.
·
To disable a Tracker Pager at your station,
1. PRESS INTERCOM.
2. DIAL
#06.
·
To send a call back message to someone’s Tracker Pager
after receiving a ring no answer,
1. MAKE an intercom call to someone and receive no answer.
2. PRESS programmed TRACK button OR DIAL
#01.
3. After your station returns to idle* hang up handset or press
SPEAKER to end. The Tracker Pager system will transmit your
station extension number to called party’s Tracker Pager display.
(Some models will also display your station name if the system is
programmed to include station names.)
* If the Tracker paging system does not accept your actions, an error tone sounds at your telephone.
72 Attendant Manual - DSU II Digital Expandable System
Other Features GCA70-245