Programming instructions

Do Not Disturb Condition
You can set your telephone to a do not disturb mode using the designated interac
-
tive or programmable button. The associated indicator turns on as an indication
of active DND and an appropriate message appears in the display of LCD
speakerphones. Under the DND condition, an outside call forwards to another
station according to the call forwarding feature. An intercom number call doesn’t
ring a DND station and the system sends a fast busy signal to the caller to distin
-
guish the DND condition from a standard busy line. No paging announcements
are received on the DND station. Even though your station is in the DND mode,
you can still make outgoing calls and access other features.
·
To enable DND, proceed as follows:
1. SELECT
OPTIONS
.
2. SELECT
NEXT
until the
DND
option appears.
3. SELECT
DND
.
4. SELECT
ON
.
5. SELECT
EXIT
.
6. PRESS SPEAKER to end.
·
To disable the DND condition,
1. REPEAT the above procedure, BUT SELECT
OFF
instead of
ON
at step 4.
·
To set a Do Not Disturb condition at your
telephone when a call rings at your
station,
1. Hear ringing and notice incoming call information in display.
2. PRESS programmed DO NOT DISTURB button. (See Feature
Buttons section on page 57 for programming instructions.)
68 Attendant Manual - DSU II Digital Expandable System
Other Features GCA70-245
Do Not Disturb
ON OFF< PREV
Setting Do Not Disturb
Do Not Disturb
MON
24 12:35
Station With DND Set