Programming instructions

·
To create standard feature access buttons proceed as
follows:
1. SELECT
OPTIONS
.
2. SELECT
NEXT
until
FEAT
appears.
3. SELECT
FEAT
.
4. SELECT
NEXT
until desired feature choice is
displayed.
5. SELECT one of the buttons below the currently
displayed selections to choose your desired
selection.
6. RESPOND to any menu prompts associated with feature (such as
designating a Zone for
PAGE
).
7. PRESS programmable button for storage
location.
8. SELECT
PREV
OR
NEXT
until next feature
choice is displayed or until
EXIT
is displayed.
9. REPEAT last two steps until all feature buttons
are programmed, OR SELECT
EXIT
to end.
Be sure to record the function of programmed buttons on
your telephone’s paper designation strip.
·
To clear a feature button assignment,
1. REPEAT the above procedure, BUT SELECT
CLEAR
before
selecting storage location button.
58 Attendant Manual - DSU II Digital Expandable System
Programming GCA70-245
Page
ZONE
ALL
PREV
Responding to Selections
Required for Paging
Program Button
DND PRIV NEXT
Selecting a Feature