Programming instructions

Feature Access Codes

In addition to the system features which may be programmed using the interac

tive buttons, several other features may be programmed by using their access

codes. The feature codes are programmed like speed dial numbers and can

occupy the same programmable buttons on your telephone.

To store a system feature access code,

1. SELECT

OPTIONS

2. SELECT

until

SDIAL

option appears.

3. SELECT

SDIAL

ADIAL

4. PRESS programmable button OR dial pad but

ton (0–9) to choose storage location.

5. DIAL access code associated with feature.

NOTE: Access codes are listed in Appendix C, Quick Reference Guide -

DSU II Digital Expandable Systems found on page101.

6. SELECT

SAVE

to store the number.

7. REPEAT previous steps until all numbers are

stored, OR SELECT

EXIT

8. PRESS SPEAKER to end.

As you program numbers, fill in the identification strips on

your telephone.

NOTE: The telephone system allows only one autodial number at a programma

ble button; however, you can store an autodial number or feature code at a

second level of a location where a DSS is already stored; just repeat the pro

gramming procedure.

Attendant Manual - DSU II Digital Expandable System 55

GCA70-245 Programming

Select Location

Choose a Location

Enter Number

Dial the Access Code