Programming instructions

NOTE: You may need a pause between numbers to compensate for differences
in response time between your system and the host system (ask your atten
-
dant about this). To store a pause, press HOLD , then continue dialing. If
your system is behind a host system that needs a hookflash to access a
feature, press TAP to store a hookflash, then continue dialing. Also, you may
need to erase the typed digits appearing in your display to correct them. If
you do, select BKSP once for each digit to be removed.
7. SELECT
SAVE
to store number.
8. PRESS next location button AND STORE next
number.
9. REPEAT previous step until all numbers are
stored, OR PRESS SPEAKER to end.
54 Attendant Manual - DSU II Digital Expandable System
Programming GCA70-245
SAVE
BKSP
PREV
918049782200
Entering a Number
R
Speedial and Autodial Programmable Locations