Programming instructions

Autodial And Speed Dial Numbers
Automatic dialing is a feature that lets you store and dial frequently called
numbers using one or two buttons. You can store numbers for speed dialing at
any programmable button that is not now assigned as a line button or other
feature by the system administrator or installer or at the keypad numbers.
Autodial and speed dial buttons can store up to 16 digits plus an intercom or line
selection. Stored digits include 0–9, S and #. The system stores a pause at any
point where the HOLD button is pressed, and stores a hookflash at any point
where the TAP button is pressed.
NOTE: The Federal Communications Commission (FCC) requires that when
programming emergency numbers and (or) making test calls to emergency
numbers:
1. Remain on the line and briefly explain to the dispatcher the reason for the
call;
2. Perform such activities in the off-peak hours, such as early morning or
late evening.
Outside numbers and feature codes are commonly referred
to as autodial numbers when stored at the programmable
button locations; however, they are referred to as personal
speed dial numbers when stored at the 10 keypad number
locations.
·
To store an outside number or a feature
code as an autodial or speed dial number,
follow the display prompts and proceed
as follows:
1. SELECT
OPTIONS
.
2. SELECT
NEXT
until
ADIAL
and
SDIAL
is
displayed.
3. SELECT
ADIAL
to choose autodial program
-
ming, OR
SDIAL
to choose speed dial
programming.
4. PRESS programmable button or keypad button
to choose storage location.
52 Attendant Manual - DSU II Digital Expandable System
Programming GCA70-245
ADIAL
SDIAL
NEXT
Choosing Mode
Select Location
PREV
Selecting a Location