Programming instructions

Programming

DSS Numbers

Storing another station extension number at a DSS/BLF programmable location

allows you to monitor that station, dial it with the press of one button, or pick up

or hold calls at that station quickly and conveniently.

To store an intercom extension number as a DSS number,

proceed as follows:

1. SELECT

OPTIONS

2. SELECT

until

DSS

appears.

3. SELECT

DSS

4. PRESS programmable button to choose

location.

5. DIAL extension number.

6. PRESS next location button AND STORE next DSS number.

7. REPEAT the previous step until all DSS numbers are stored, OR

PRESS SPEAKER to end.

CAUTION

Do not attempt to program interactive buttons; doing so can cause the

system to make features unavailable. If you inadvertently program interac

tive buttons, you can retrieve their functions in the following manner:

1. PRESS INTERCOM

**1

2. PRESS desired interactive button to reprogram

3. DIAL

91, 92,or93 to program buttons from left to right.

Attendant Manual - DSU II Digital Expandable System 51

GCA70-245 Programming

Dial Extension

Designating an Extension