Programming instructions

LCD Message Delivery
You can set standard and system supplied custom display messages by dialing a
specific code at your telephone. When another user places a call from an LCD
speakerphone, the preset LCD message from your station will flash on the
caller’s LCD. When you set a message, the intercom light at your telephone
flashes to indicate that the feature is active.
·
To turn message on,
1. PRESS INTERCOM.
2. DIAL
*02.
3. DIAL the desired number from your message list. The default
messages of “Back At” and “Call” may be used:
•
For default message 1, which is “Back At,” dial time in
twelve-hour format using the # as a colon.
•
For default message 2, which is “Call,” dial the telephone
number of where you will be.
4. PRESS SPEAKER to end message. Intercom light flashes steadily.
·
To turn off message and your intercom light,
1. PRESS INTERCOM.
2. DIAL
#02.
48 Attendant Manual - DSU II Digital Expandable System
Nonverbal Messaging GCA70-245