Programming instructions

·
If the intercom party does not answer their
telephone when ringing, take one of the
following steps:
1. SELECT
CAMP
to Camp-on to that station.
2. SELECT
MSG
to leave a message-waiting indi
-
cation at the station.
Unscreened Call Transfers
Unscreened call transfer allows you to transfer both line and intercom calls from
your station to another station or group without first announcing them. The
unscreened transferred call appears at the other station where it rings if that
station is idle or automatically camps-on and awaits an answer if that station is
busy.
·
To transfer an unscreened call to another system
telephone,
1. ANSWER call.
2. PRESS TRNS/CONF (call is automatically placed on hold).
3. DIAL extension number of telephone to receive transfer, OR
PRESS DSS/BLF button for that extension.
4. PRESS SPEAKER to disconnect (if in speakerphone mode), OR
HANG UP. The transfer will ring at the called telephone.
The call automatically rings back to your station after a programmed recall
period. There is no limit as to how many calls that can be camped onto another
station.
·
If an unscreened transfer call is not
answered and recalls to your telephone,
you can take one of the following steps:
1. PRESS HOLD to place the call on hold at your
telephone.
2. SELECT
ANS
to return to the call.
3. SELECT
SEND
to retry the transfer.
Attendant Manual - DSU II Digital Expandable System 37
GCA70-245 Advanced Call Handling
J Doe
CAMP MSGTRACK
No Answer From J Doe
Recall Line 2
SEND
HOLD
ANS
Attempted Transfer of Line
2 To J Doe Is Recalling